Alcatel-carrier-internetworking-solutions Omni Switch/Router Manuel d'utilisateur télécharger pdf (Page 79)

Diagnostic Tests

Page 3-9

9. If the hot swapping mode has not timed out, enter

swap off

at the system prompt. Something like the following will then be displayed.

Swap is OFF, timeout is 5 minutes

usage swap { ON [ minutes ] | OFF [ minutes ] }

Diagnostic Tests

All switching modules are subjected to extensive power-on diagnostics during the Power-On

Self-Test cycle (POST). These diagnostics are designed to be as extensive as possible without

causing disruption to external networks or requiring special test connections. While the diag-

nostics are running, the MPX OK2 LED will be flashing green. LEDs on the switching module

can provide information on the success or failure of these tests. Also refer to Chapter 35,

“Troubleshooting,” for information on error conditions reflected in the LED displays.

More extensive diagnostic tests are available for off-line testing of switching modules. See

Chapter 36, “Running Hardware Diagnostics,” for further information.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 109 110

Pas de commentaire

Alcatel-carrier-internetworking-solutions Omni Switch/Router Manuel d'utilisateur Page 79